 |
Ball End Fittings
Pull test strength of balls for size cable 3/32" and smaller is 80% of breaking strength of cable. Balls for cable size 1/8" and larger, pull test strength is 60%.
Click here for all standard sizes
| Materials |
For Bare Cable Diameter |
Ball Diameter After Swaging |
| Zinc Plated Steel, Stainless Steel |
3/64" to 3/16" |
.190" to .442" |
|
End Fitting Applications
- Lanyards
- Push/Pull Controls
- Release Cables
- Connecting Cables
- Restraint Cables
- Brake Cables
- Lifting Cables
- Release Pin
- Support Cables
- Tension Cables
- Throttle Cables
- Exercise Equipment
- Garage Door Mechanical
- Window Components
|
 |
Ball Shanks
Used in lanyards, push-pull cables like throttle and brake cables, exercise cables and many other uses. Used for connecting, restraining, adjusting, etc. Ball shanks protect the cable from other attached metal parts such as strap eyes and strap forks. Also, used with threaded plugs as used in exercise equipment. Allows rotation of cable.
Click here for all standard sizes
| Materials |
For Bare Cable Diameter |
Ball Diameter After Swaging |
Shoulder Diameter After Swaging |
| Zinc Plated Steel, Stainless Steel |
3/64" to 3/16" |
.190" to .442" |
.112" to .255" |
|
 |
Handles and Knobs
Used in push pull and control cables such as in power equipment as release cables, throttle cables, brake cables, chokes, etc. Purposes include actuating, adjusting, regulating, rotating, releasing, accelerating, etc.
Click here for all standard sizes
| Materials |
Black Knob Size |
Black T-Handle |
| Phenolic Resin/Composite. |
1-1/4" |
1/4-20 x 7/16 |
|
 |
Sleeves
Used to produce a cable with a loop or a loop with a thimble inside. Can be used in many applications as loop can be sized to suit specific need. Used in lanyards, security cables, slings and many others for purposes such as lifting, restraining, supporting, and connecting.
Click here for all standard sizes
| Materials |
For Bare Cable Diameter |
|
| Copper, Aluminum, Stainless Steel |
3/64" - 1/4" |
* Available in thin or standard wall sizes |
|
 |
 Stamped Eyes
Tyler Madison offers over 30 standard end termination configurations for common application. We can also custom fabricate stamped eyes to meet your unique needs. Eyes can be bent to any specified angle.
Click here for all standard sizes
| Materials |
For Bare Cable Diameter |
Hole Sizes |
| Zinc Plated Steel, Stainless Steel |
3/64" - 1/8" |
.160 - .500 |
|
 |
Stops
Stops can be swaged on in the middle of an assembly. Used in garage door cables, security cables, lanyards, many industrial uses, drive cables, control cables. Many purposes which permit rotation.
Click here for all standard sizes
| Materials |
For Bare Cable Diameter |
|
| Copper, Aluminum, Stainless Steel |
1/16" - 1/4" |
|
|
 |
Strap Forks and Strap Eyes
Used with a ball or ball shank end fitting, these fittings allow for cable rotation. Purposes include security, attaching, hanging, lifting and many others.
Click here for all standard sizes
| Materials |
For Bare Cable Diameter |
Hole Sizes |
| SS in NAS and Commercial |
1/16" to 3/16" |
.188 - .313 |
|
 |
Thimbles
Used in cables with loops when wear is a concern. Provides wear resistance, greater strength and keeps shape of loop open.
Click here for all standard sizes
| Materials |
For Bare Cable Diameter |
|
| Galvanized Steel, Cold Rolled Steel (AN100 type), Stainless Steel |
1/16" - 1/4" |
* Available in standard size or heavy duty size |
|
 |
Threaded Studs
Studs are available with right or left handed threads.
Click here for all standard sizes
| Materials |
For Bare Cable Diameter |
Thread Length |
Overall Length |
|
| Steel Zinc Plated, Stainless Steel |
3/64" - 3/16" |
1" - 2 1/4" |
1 5/8" - 3 1/4" |
* Various thread sizes available |
|
| Additional End fittings are available. Also, custom, non-standard end fittings can also be produced for your specific mechanical cable assembly application or, allow us to recommend a standardized fitting to reduce cost. |
|
|
|
