Please wait...
This configuration does not exist.
Select End Fitting One Select End Fitting Bare/Fuse Cut Stop Loop With Sleeve Loop With Sleeve & Thimble Plain Ball Ball Shank Stamped Eye Ends Threaded Stud Strap Eye Strap Fork Stainless Marine Eye Z-Fitting Other
Pinhole Size: 0.264 inches 0.264 inches 0.264 inches 0.327 inches 0.389 inches 0.514 inches 0.640 inches 0.640 inches
Sleeve Material Aluminum Stainless Tin Plated Copper Copper
Thimble No Yes
Thimble Material: Zinc Plated Steel Stainless
Thimble Duty AN100
Loop Coating Condition Bare (stripped) loop (holds to breaking strength) Loop formed over coating (does not hold to breaking strength)
Optional Loop Hardware None Snap Hooks/carabiners Quick Links Eyebolts Hooks Other #Hardware Description#
Custom End Fitting Notes:
Add Nuts to Threaded Stud? No thanks (0 nuts) Yes please! (2 nuts) Just one will do (1 nut)
Add Washer to Threaded Stud? No thanks (0 washers) Yes please! (2 washers) Just one will do (1 washers)
End Fitting Type Commercial Mil Spec
End Fitting Material Select End Fitting Material Aluminum Zinc Plated Copper Stainless Stainless Carbon Steel With Zinc Plate Clear
Part Number example: TMI# 333-001.2:
Threaded Stud Size Select Threaded Stud ID TMI# 463-800.5: 10-24 TL- 0.55", OAL- 1.00" TMI# 463-300: 10-32 TL- 0.50", OAL- 0.95" TMI# 463-500: 10-32 TL- 1.25", OAL- 1.8" TMI# 463-900: 10-24 TL- 1.25", OAL- 1.8" TMI# 463-920: 10-24 TL- 0.55", OAL- 1.00" TMI# 464-000.5: 1/4-20 TL- 0.75", OAL- 1.15" TMI# 466-002.5: 1/4-20 TL- 1.25", OAL- 2.75" TMI# 464-001.2: 1/4-28 TL- 1.25", OAL- 2.06" TMI# 464-003: 1/4-20 TL- 1.25", OAL- 2.25" TMI# 463-010: 1/4-28 TL- 1.375", OAL- 2.25" TMI# 464-002: 1/4-20 TL- 1.25", OAL 2.25" TMI# 464-005: 1/4-20 TL- 3.5", OAL 4.5" TMI# 464-006: 1/4-20 TL- 1.7", OAL 3.5" TMI# 464-011: 5/16-18 TL- 1.45", OAL 2.2" TMI# 470-040SS: 1/4-20 TL- 1.5", OAL- 2.25" TMI# 463-012: 1/4-28 with slot for flathead TL- 1.4", OAL- 2.1"
Loop With Sleeve & Thimble Size Select Loop With Sleeve & Thimble ID TMI# 100-004.5: Loop Length 0.355 in, 0.893 in TMI# 100-010.1: Loop Length 0.356 in, 0.929 in TMI# 100-010.1: Loop Length 0.356 in, 0.929 in TMI# 100-011: Loop Length 0.410 in, 1.027 in TMI# 100-016: Loop Length 0.502 in, 1.363 in TMI# 100-019: Loop Length 0.683 in, 1.827 in TMI# 130-000: Loop Length 0.355 in, 0.893 in TMI# 130-500: Loop Length 0.356 in, 0.929 in TMI# 120-010: Loop Length 0.356 in, 0.929 in TMI# 120-015: Loop Length 0.410 in, 1.027 in TMI# 100-016.3: Loop Length 0.502 in, 1.363 in
Loop With Sleeve Size Select Loop With Sleeve ID TMI# 100-002.5: Loop Length 0.893 in TMI# 100-002.2: Loop Length 0.893 in TMI# 100-003: Loop Length 0.893 in TMI# 100-0004.2: Loop Length 0.893 in TMI# 100-005: Loop Length 0.929 in TMI# 100-006.2: Loop Length 0.929 in TMI# 100-008: Loop Length 0.929 in TMI# 120-009: Loop Length 0.929 in TMI# 100-017.5: Loop Length 1.027 in TMI# 100-011.2: Loop Length 1.363 in TMI# 100-015: Loop Length 1.827 in
Stamped eye carbon steel zinc plate: Select Carbon Steel Stamped Eye ID TMI# 301-000: 0.160" thru hole, O.D. 0.320" TMI# 301-000.5: 0.190" thru hole, O.D. 0.320" TMI# 301-001: 0.129" thru hole, O.D. 0.420" TMI# 301-002: 0.190" thru hole, O.D. 0.430" TMI# 301-005: 0.260" thru hole, O.D. 0.430" TMI# 301-005.2: 0.315" thru hole, O.D. 0.625" TMI# 301-006: 0.205" thru hole, O.D. 0.50" TMI# 301-007: 0.250" thru hole, O.D. 0.50" TMI# 301-007.3: 0.320" thru hole, O.D. 0.75" TMI# 301-008: 0.375" thru hole, O.D. 0.75" TMI# 301-009: 0.250" thru hole, O.D. 0.580" TMI# 301-010.5: 0.315" thru hole, O.D. 0.850" TMI# 301-011: 0.375" thru hole, O.D. 0.850" TMI# 301-012: 0.50" thru hole, O.D. 0.850" 0.50" pinhole, O.D. 1"
Stamped eye stainless steel: Select Stainless Stamped Eye ID TMI# 333-001.2: 0.160" thru hole, OD 0.320" TMI# 333-002: 0.190" thru hole, OD 0.320" TMI# 333-005: 0.190" thru hole, OD 0.420" TMI# 333-006: 0.260" thru hole, OD 0.420" TMI# 333-0075: 0.205" thru hole, OD 0.50" TMI# 333-0077: 0.250" thru hole, OD 0.50" TMI# 333-008: 0.250" thru hole, OD 0.75" TMI# 333-008.2: 0.380" thru hole, OD 0.75" TMI# 333-008.5: 0.250" thru hole, OD 0.580" TMI# 333-008.3: 0.375" thru hole, OD 0.850" TMI# 333-007.8: 0.50" thru hole, OD 0.850" 0.50" pinhole, O.D. 1"
Ball Shank Size Select Ball Shank ID 0.190" Ball, 0.112" Shank" 0.190" Ball, 0.112" Shank" 0.253" Ball, 0.143" Shank" 0.315" Ball, 0.190" Shank" 0.379" Ball, 0.222" Shank" 0.442" Ball, 0.255" Shank"
Ball End Fitting Size Select Ball End Fittings ID TMI# 110-000.1 0.190" Ball TMI# 100-002 0.190" Ball TMI# 110-003 0.253" Ball TMI# 110-003.5 0.315" Ball
Marine Eye Fitting Size Select Marine Eye Fittings ID TMI# 360-003 wire with diameters .190, .218, .093, 1.572 wire with diameters .190, .254, .108, 1.945 TMI# 360-003.2 wire with diameters .190, .383.195, 2.352 wire with diameters .250, .406, .202, 2.655 wire with diameters .313, .543, .260, 3.071 TMI# 360-003 wire with diameters .190, .218, .093, 1.572 wire with diameters .190, .254, .108, 1.945 TMI# 360-003.2 wire with diameters .190, .383.195, 2.352 wire with diameters .250, .406, .202, 2.655 wire with diameters .313, .543, .260, 3.071
Strap Fork Fitting Size Select Strap Fork Fittings ID TMI# 355-555 0.210" width TMI# 355-600 0.390" width TMI# 355-550 0.185" width
Strap Eye Fitting Size Select Strap Eye Fittings ID TMI# 355-606 0.088" width TMI# 355-608 0.103" width TMI# 355-618 0.190" width TMI# 355-610 0.197" width
* Not available in selected diameter, please put fitting details in the Note section below,
change diameter, or select different end fitting. *
Dimensions NOTE: All measurements are in inches.
Input loop length in field below:
